Tray Lifting up Mechanism
SM 7 D3GQ
1.4 TRAY LIFTING UP MECHANISM
The pressure of the tray bottom plate [F] can be adjusted depending on the amount of paper remaining.
The drive of the tray lift motor raises the tray bottom plate [F] via the tray bottom plate pressure lever
[A], the pressing spring, and the tray bottom plate lift lever [E].
The pulses from the lift lever encoder [C] are detected by the tray bottom plate lift sensor (S5) [B]. The
tray lift motor is controlled based on the pulses from the encoder.
Callout Item Callout Item
[A] Tray Bottom Plate Pressure Lever [D] Tray Bottom Plate HP Sensor (S4)
[B] Tray Bottom Plate Lift Sensor (S5) [E] Tray Bottom Plate Lift Lever
[C] Lift Lever Encoder [F] Tray Bottom Plate
To Next Page
Loading...
