Main Machine Installation: Installation Procedures
D0CA/D0C9/D0C8/D0CB 2-18 SM
12. Shake each toner bottle five or six times.
13. Install each toner bottle [A] in the machine.
Install the black toner bottle first.
K (Black) bottle is larger than the other colors, C, M, and Y. To prevent bottles getting stuck
in different holders, begin installing with K (Black) bottle and then C, M, and Y.
14. Close the front cover.
15. Connect the power cord to the machine.
16. Connect the network cable, if the client IP addresses are automatically provided through a
system such as DHCP in the network settings. If a static IP address is provided to the client
machines, contact the customer (network administrator) to determine the appropriate
timing for connecting the network cable.
17. Turn ON the main power.
• Toner Initialization starts. It takes about 5 minutes to fill the toner up. Wait until it
finishes.
To Next Page
Loading...
