Internal Finisher
SM 7-35 D0CA/D0C9/D0C8/D0CB
7.4.3 PAPER FEED
Paper transport motor (M16) [A] drives the entrance roller [B] and shift roller [C].
• Paper exit motor (M17) [D] drives the paper exit roller [E].
• When the entrance sensor (S45) [F] detects the leading edge of the paper, the exit guide
plate unit [G] is lowered from its home position by the exit guide plate motor (M21) [H].
• Paper exit roller [E] feeds the paper to the output tray.
This diagram shows paper feed without stapling.
To Next Page
Loading...
