Ricoh IM C400F

Energy Save
SM 7-117 D0CA/D0C9/D0C8/D0CB
Detailed
Descriptions
When Fusing Unit Off mode is enabled, the display is on but the fusing unit is off to save energy.
The machine requires roughly the same time as warm-up time to recover from Fusing Unit Off
mode.
Default: [On]
If [Fusing Unit Off Mode (Energy Saving) On/Off] is set to [On], you can specify when to exit
Fusing Unit Off mode and the time to elapse before entering Fusing Unit Off mode.
If [Exit Fusing Unit Off Mode] is set to [On Printing], the machine exits Fusing Unit Off mode
when printing is performed.
If [Exit Fusing Unit Off Mode] is set to [On Operating Control Panel], the machine exits Fusing
Unit Off mode when a key other than the copy function key is pressed on the control panel of
the machine.
[Settings] (System Settings > Machine > Power/Energy Saving > Energy Saving
Recovery for Business Application)
Specify whether or not to enable low-energy recovery from Sleep mode to use applications
independent of the machine, such as Address Book Management or Browser.
Default: [Off]
If [On (Energy Saving)] is selected, it takes longer than usual to be ready to use the machine.
Recovery Time/Reduced Electrical Consumption
Model Name Reduced electrical consumption in Sleep
mode
*1
Recovery time from Sleep
mode
*1
IM C300 0.65 W 7.7 sec.
IM C300F 0.65 W 7.7 sec.
IM C400F 0.65 W 8.0 sec.
IM
C400SRF
0.65 W 8.2 sec.
Model
Name
Reduced electrical consumption in Sleep
mode
*1
Recovery time from Sleep
mode
*1
IM C300 0.65 W 7.7 sec.
IM C300F 0.66 W 7.7 sec.
IM C400F 0.65 W 8.0 sec.