System Maintenance
SM 8-37 D0CA/D0C9/D0C8/D0CB
Menu level Description
1st level 2nd level 3rd level 4th level
Assignment Mode].
You cannot set other than
the above because of high
brightness.
Application
Settings
Displays a list of installed
applications.
If you press [SETTINGS] for
an application, the setting
screen for the CE is
displayed. The screen does
not change if the application
has no setting items.
Recovery by
Authentication
Priority
Recovery by
Authentication
Priority
This setting gives priority to
the recovery time from
energy saving modes when
an IC card authentication
device is connected.
When this setting is
selected, the MFP does not
enter Engine OFF mode,
and always recovers from
Silent mode.
Start Time
(hh:mm)
You can specify the start
time of Authentication
priority mode.
Note: This can be changed
only when [Recovery by
Authentication Priority] is
deselected.
Period (Hours) You can specify the period
of validity of Authentication
priority mode.
Note: This can be changed
only when [Recovery by
Authentication Priority] is
deselected.
Backup/Restore Specify whether to enable
To Next Page
Loading...
