Troubleshooting
SM 8-63 D0CA/D0C9/D0C8/D0CB
3. A reconfirmation screen is displayed. Select [Yes].
The message “wiping data…” appears and the data and cache are cleared (within 1
minute).
On completion, the displayed screen returns to the recovery mode menu.
If you reboot the machine as is, the machine cannot display the messages in the local
language because of the absence of the LegacyUI data.
The pre-installed applications have also been deleted, so the alert appears.
For restoration, follow the installation procedure of package firmware, and update it.
To Next Page
Loading...
