Maintenance Tables
D0CA/D0C9/D0C8/D0CB 2-2 SM Appendices
Therefore, these parts are treated as Yield Parts.
Scanner Unit
Item PM/Yield Parts EM Remarks
Exposure glass C Clean with a cleaning cloth.
ADF exposure glass C Clean with a cleaning cloth.
PCDU
The PM count for the following items is based on the sheets of copy paper fed:
Item PM/Yield
Parts
36k 60k EM Remarks
PCDU
(K)
P R The PCDU (K) for IM C300 series is different from IM
C400 series. Make sure of the correct part number
before ordering it.
PCDU
(C)
Y R At color ratio 30%, the replacement interval is 120k.
PCDU
(M)
Y R At color ratio 30%, the replacement interval is 120k.
PCDU
(Y)
Y R At color ratio 30%, the replacement interval is 120k.
Transfer Unit
The PM count for the following items is based on the sheets of copy paper fed:
Item PM/Yield Parts 120k EM Remarks
ITB (Image transfer belt) unit Y R
Paper transfer roller Y R
Fusing Unit
The PM count for the following items is based on the sheets of copy paper fed:
Item PM/Yield
Parts
60k 120k EM Remarks
Fusing unit Y R
Entrance guide
plate
C Remove the toner, wax, and paper dust
with a dry cloth.
Exit guide plate C Remove the toner, wax, and paper dust
with a dry cloth.
Separation plate C Remove the toner, wax, and paper dust
with a dry cloth.