Rohde & Schwarz R&S FSL3 - Page 1257

SENSe Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.498 E-11
SENSe:DETector Subsystem (CATV, K20)
The SENSe:DETector subsystem controls the acquisition of measurement data via the selection of the
detector for the corresponding trace.
Commands of the SENSe:DETector Subsystem
– [SENSe<1|2>:]DETector<1...4>[:FUNCtion]
– [SENSe<1|2>:]DETector<1...4>[:FUNCtion]:AUTO
[SENSe<1|2>:]DETector<1...4>[:FUNCtion]
For details refer to "[SENSe<1|2>:]DETector<1...6>[:FUNCtion]" on page 6.186.
[SENSe<1|2>:]DETector<1...4>[:FUNCtion]:AUTO
For details refer to "[SENSe<1|2>:]DETector<1...6>[:FUNCtion]:AUTO" on page 6.186.