R&S FSL Power Measurements – MEAS Key
1300.2519.12 4.91 E-11
Menu / Command Submenu / Command Submenu / Command Command
Margin
Show Peaks
More
List Up
List Down
Save Evaluation List ASCII File Export
Decim Sep
Meas Start/Stop
More
All Functions Off
Harmonic Distortion Harmonic On/Off
No. of Harmonics
Harmonic Sweep Time
Harmonic RBW Auto
Adjust Settings
Full Size Diagram
All Functions Off
Switches off all power measurement functions.
Remote: CALC:MARK:FUNC:<function> OFF
TOI
Opens a submenu and activates the measurement of the 3rd order intercept point.
A two–tone signal with equal carrier levels is expected at the R&S FSL input. Marker 1 and
marker 2 (both normal markers) are set to the maximum of the two signals. Marker 3 and marker
4 (also both normal markers) are placed on the intermodulation products. When the function is
enabled, the frequency entry is activated for the delta markers. They can be set manually.
The R&S FSL calculates the third order intercept point from the level spacing between normal
markers and delta markers and displays it in the marker field.
Remote: CALC:MARK:FUNC:TOI ON
Remote: CALC:MARK:FUNC:TOI:RES?
Search Signals
Activates all markers.
Remote: CALC:MARK:FUNC:TOI:RES?
To Next Page
Loading...
