Bluetooth Measurements (Option K8) R&S FSL
1300.2519.12 4.172 E-11
Softkeys of the frequency menu (Bluetooth mode)
The following table shows all softkeys available in the frequency menu in Bluetooth mode (FREQ key).
It is possible that your instrument configuration does not provide all softkeys. If a softkey is only
available with a special option, model or (measurement) mode, this information is delivered in the
corresponding softkey description.
Menu / Command Command
Center
CF–Stepsize 0.1*Chan Spacing
= Chan Spacing
Center
Opens an edit dialog box to change the center frequency.
If the frequency channel has been set via the Channel softkey, a change of the center
frequency is possible, but the relation to the frequency channel will be lost, which means that the
value range for the center frequency is not limited to frequencies within valid frequency
channels.
The return to the fixed relation between center frequency and Bluetooth frequency channels is
performed when Channel softkey is pressed or when another measurement is selected. The
center frequency will be rounded to the nearest frequency channel.
Remote: FREQ:CENT 100MHz
CF–Stepsize
Opens a submenu to set the step size of the center frequency.
0.1*Chan Spacing
Sets the step size of the center frequency to 1/10 of the channel spacing.
= Chan Spacing
Sets the step size of the center frequency to the size of the channel spacing.
To Next Page
Loading...
