CDMA2000 BTS Analyzer (Option K82) R&S FSL
1300.2519.12 4.350 E-11
Save As Standard
Opens the Save As Standard dialog box, in which the currently used SEM settings and
parameters can be saved and exported into an *.xml file. Enter the name of the file in the file
name field.
It is also possible to save the settings under one of the default bandclass file names (see
Bandclass softkey). When overwriting one of the default files, the customized settings will be
linked to the corresponding bandclass while the default settings are lost.
To restore the default bandclass settings press the Restore FSL K82 Files softkey.
Remote: ESP:STOR "<file name>"
Meas Start/Stop
For details on the Meas Start/Stop softkey refer to the Meas Start/Stop softkey in the Spectrum
Emission Mask submenu of the base unit.
Restore FSL K82 Files
"softkey:Restore FSL K82 Files (K82)"Restores all default files of the K82 option into the
C:\R_S\INSTR\SYSTEM_ROOT_RW\sem_std\cdma2000\dl directory. If changes have been
applied to the files, these will be lost.
Remote: ESP:PRES:REST
Occupied Bandwidth
Activates measurement of the bandwidth assigned to the signal.
For details on screen layout and default values see the description of the Occupied Bandwidth
on page 4.301.
Also opens the Occupied Bandwidth submenu containing the following softkeys:
% Power Bandwidth
Channel Bandwidth
Adjust Ref Level
Adjust Settings
Remote: CONF:CDP:MEAS OBAN
Remote: CALC:MARK:FUNC:POW:RES? OBAN (result query)
% Power Bandwidth
For details refer to the % Power Bandwidth softkey in the OBW submenu of the base unit.
Channel Bandwidth
For details refer to the Channel Bandwidth softkey in the ACP Config submenu of the base
unit.
To Next Page
Loading...
