R&S FSL CDMA2000 BTS Analyzer (Option K82)
1300.2519.12 4.349 E-11
Edit Sweep List
For details on the Edit Sweep List softkey and its submenu refer to the Edit Sweep List softkey
in the Spectrum Emission Mask submenu of the base unit.
List Evaluation
For details on the List Evaluation softkey and its submenu refer to the List Evaluation softkey in
the Spectrum Emission Mask submenu of the base unit.
Edit Reference Range
Opens the Reference Range dialog box. For details refer to the Edit Reference Range softkey
in the Spectrum Emission Mask submenu of the base unit.
Edit Power Classes
Opens the Power Classes dialog box. For details refer to the Edit Power Classes softkey in the
Spectrum Emission Mask submenu of the base unit.
Bandclass
Opens a dialog box, to select a specific bandclass.
A list of the supported bandclasses can be found in the description of the Bandclass softkey in
the ACP measurement menu.
The settings for each bandclass are provided in *.xml files that are located in the directory
C:\R_S\INSTR\sem_std\cdma2000\dl. The files themselves are named C2K_DL_BC01.XML
(bandclass 1) to C2K_DL_BC17.XML (bandclass 17). By selecting one of the bandclasses from
the dialog box, the correct file will be loaded automatically. The file can also be loaded manually
(see Load Standard softkey).
Remote: CONF:CDP:BCL <value>
Load Standard
Opens the Load Standard dialog box, in which the *.xml file to be imported can be selected. If a
file is imported, the SEM settings specified in the file will be used. All previous SEM settings will
be lost.
Remote: ESP:PRES "<file name>"
To Next Page
Loading...
