R&S FSL Measurement Documentation - PRINT Key
1300.2519.12 4.521 E-11
Path Directory in which the file is stored. The default path is
C:\r_s\instr\user
Files List of the existing files in the same format
File Name Name of the file
Remote: HCOP:ITEM:ALL
Remote: HCOP
Remote: HCOP:NEXT
Device Setup
Opens the Hardcopy Setup dialog box to define the output: image file, clipboard, or the printer.
The dialog box consists of two tabs which are selected via the Device 1/2 softkey. For further
information refer to the Quick Start Guide.
Remote: HCOP:DEV:LANG GDI
Remote: SYST:COMM:PRIN:ENUM:FIRS?
Remote: SYST:COMM:PRIN:ENUM:NEXT?
Remote: SYST:COMM:PRIN:SEL <Printer>
Remote: HCOP:PAGE:ORI PORT
Remote: HCOP:DEST "SYST:COMM:PRIN"
Remote: HCOP:TDST:STAT?
Remote: HCOP:TDST:STAT OFF
Device 1/2
Selects the tab of the device in the Device Setup dialog box. The analyzer is able to manage
two print settings independently of each other. For each device the print setting is displayed on
the corresponding tab of the Device Setup dialog box (Device Setup softkey). For further
information refer to the Quick Start Guide.
Colors
For details see Print Colors softkey of the setup menu.
This softkey is available from firmware version 1.10.
Select Print Color Set
For details see Select Print Color Set softkey of the setup menu.
This softkey is available from firmware version 1.10.
Color On/Off
For details see Color On/Off softkey of the setup menu.
This softkey is available from firmware version 1.10.
To Next Page
Loading...
