Command and Drive Data Sets – Overview
Parameters
1-301
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
1.3.2 Drive Data Sets (DDS)
p0005[0...2] Display selection / Display selection
r0035[0...2] CO: Act. motor temperature / Act. mot.temp.
p0291[0...2] Inverter protection / Inverter protect.
p0300[0...2] Select motor type / Select motor type
p0304[0...2] Rated motor voltage / Rated mot. voltage
p0305[0...2] Rated motor current / Rated mot. current
p0307[0...2] Rated motor power / Rated motor power
p0308[0...2] Rated motor cosPhi / Rated mot. cosPhi
p0309[0...2] Rated motor efficiency / Rated efficiency
p0310[0...2] Rated motor frequency / Rated motor freq.
p0311[0...2] Rated motor speed / Rated motor speed
r0313[0...2] Motor pole pairs / Motor pole pairs
p0314[0...2] Motor pole pair number / Motor pole pair no
p0320[0...2] Motor magnetizing current / Motor magnet. cur.
r0330[0...2] Rated motor slip / Rated motor slip
r0331[0...2] Rated magnetization current / Rated magnet. cur.
r0332[0...2] Rated power factor / Rated power factor
r0333[0...2] Rated motor torque / Rated motor torque
p0335[0...2] Motor cooling / Motor cooling
p0340[0...2] Calculation of motor parameters / Calc of mot.params
p0341[0...2] Motor inertia [kg*m^2] / Inertia [kg*m^2]
p0342[0...2] Total/motor inertia ratio / Tot/mot inert.rat.
p0344[0...2] Motor weight / Motor weight
r0345[0...2] Motor start-up time / Mot. start-up time
p0346[0...2] Magnetization time / Magnetization time
p0347[0...2] Demagnetization time / Demagnet. time
p0350[0...2] Stator resistance (line) / Stator res. (L)
p0352[0...2] Cable resistance / Cable resistance
p0354[0...2] Rotor resistance / Rotor resistance
p0356[0...2] Stator leakage inductance / Stator leak.induct
p0358[0...2] Rotor leakage inductance / Rotor leak.induct.
p0360[0...2] Main inductance / Main inductance
p0362[0...2] Magnetizing curve flux 1 / Magnet.curve flux1
p0363[0...2] Magnetizing curve flux 2 / Magnet.curve flux2
p0364[0...2] Magnetizing curve flux 3 / Magnet.curve flux3
p0365[0...2] Magnetizing curve flux 4 / Magnet.curve flux4
p0366[0...2] Magnetizing curve imag 1 / Magnet.curve imag1
p0367[0...2] Magnetizing curve imag 2 / Magnet.curve imag2
p0368[0...2] Magnetizing curve imag 3 / Magnet.curve imag3
p0369[0...2] Magnetizing curve imag 4 / Magnet.curve imag4
r0370[0...2] Stator resistance [%] / Stator res. [%]
r0372[0...2] Cable resistance [%] / Cable res. [%]
r0373[0...2] Rated stator resistance [%] / Rated stat.res.[%]
r0374[0...2] Rotor resistance [%] / Rotor res. [%]
r0376[0...2] Rated rotor resistance [%] / Rated rot. res.[%]
r0377[0...2] Total leakage reactance [%] / Tot.leak.react.[%]
r0382[0...2] Main reactance [%] / Main reactance [%]
r0384[0...2] Rotor time constant / Rotor time const.
r0386[0...2] Total leakage time constant / Total leak. Tconst
p0400[0...2] Select encoder type / Select enc. type
p0405[0...2] Enables selection of pulse types / Enables pulse type
p0408[0...2] Encoder pulses per revolution / Enc pulses per rev
p0410[0...2] Reverses internal direction sense / Rev dir sense
To Next Page
Loading...
