Siemens Sinamics G120 Series - Fig. 2-26 4180 - Status word 2 (r0053)

Function diagrams
Technology Functions
2-348
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Fig. 2-26 4180 – Status word 2 (r0053)
- 4180 -
Function diagram
87654321
4180_ZSW2.vsd
Technology Functions
SINAMICS G120
02.04.2007 V3.0
Status word 2 (r0053)
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15
0
1 0 3 25 4 7 6
9 8
11 10 13 12 15 14
Segment Bit Segment Bit Seven-segment display
Act StatWd2
r0053 r0053
Parameter r0053
1 = DC brake active 0 = DC brake not active
Braking control
Alarm processing
Messages
Sequence control 1)
Bit No. Meaning
1)
The sequence control is the internal control (software) for realizing the inverter status (r0001)
1 = f_act > P2167 (f_off) 1 = f_act > P1080 (f_min) 1 = Act. current r0027 >= P2170 1 = f_act > P2155 (f_1) 1 = f_act <= P2155 (f_1) 1 = f_act >= setpoint 1 = Act. Vdc r0026 < P2172 1 = Act. Vdc r0026 > P2172 1 = Ramping finished 1 = PID output r2294 == P2292 (PID_min) 1 = PID output r2294 == P2291 (PID_max) reserved reserved Download data set 0 from AOP Download data set 1 from AOP
Alarm processing
Messages Messages Messages Messages
Alarm processing
Messages Messages
Sequence control 1) Sequence control 1)