Siemens Sinamics G120 Series - Fig. 2-31 4830 - Adders, Subtracters, Multipliers, Dividers, Comparators, Setting in %

Function diagrams
Free Function Blocks
2-354
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Fig. 2-31 4830 – Adders, Subtracters, Multipliers, Dividers, Comparators, Setting in %
- 4830 -
Function diagram
87654321
4830_FreeBlocks4.vsd
Free Blocks
SINAMICS G120
02.04.2007 V3.0
Adders, Subtracters, Multipliers, Dividers,
r2870
x1 + x2
r2872
r2874
x1 - x2 x1 - x2
P2889 P2890
Out = x1 x2
CMP
100%
x1 x2
100%
x1 x2
2 Adders with 2 Inputs (1 Word) 2 Subtracters with 2 Inputs (1 Word) 2 Multipliers (1 Word)
2 Dividers (1 Word) Word Compare Connector Setting in %
Comparators, Setting in %
P2871
x1 x2
Index0
Index1
200 %
-200 %
x1 + x2
P2802[5]P2800
P2869
x1 x2
Index0
Index1
200 %
-200 %
P2802[4]P2800
P2873
x1 x2
Index0
Index1
200 %
-200 %
P2802[6]P2800
r2876
P2875
x1 x2
Index0
Index1
200 %
-200 %
P2802[7]P2800
r2878
P2877
x1 x2
Index0
Index1
200 %
-200 %
P2802[8]P2800
r2880
P2879
x1 x2
Index0
Index1
200 %
-200 %
P2802[9]P2800
r2882 r2884
P2883
x1 x2
Index0
Index1
200 %
-200 %
P2802[11]P2800
P2881
x1 x2
Index0
Index1
200 %
-200 %
P2802[10]P2800
x2
x1 100%
x2
x1 100%
r2886
r2888
P2887
x1 x2
Index0
Index1
P2802[13]P2800
P2885
x1 x2
Index0
Index1
P2802[12]P2800
Out = x1 x2
CMP