Add a name for the Pset
(optional).
This section also contains
options for View existing Pset,
Create new Pset, Copy Pset and
Delete Pset.
Click Delete Pset result to
select the Pset result to remove
from the Power Focus memory.
When clicking Delete all results
a confirmation window
appears. Select Yes to accept or
No to abort operation.
The Pset specific comments are
shown here.
When parameter C600 is set to
Pset comments, a comment can
be entered each time a Pset is
changed and stored.
The Comment dialog box
appears after a change, when
pressing Store.
To Next Page
Loading...
Need help?
General
