Atlas Copco Power Focus 3000 - Statistic programming; Running a Pset

Pset
112 (428) 9836 3123 01
7.10 Statistic programming
Expand the Statistic programming branch.
In this branch it is possible to define conditions to be included in the
statistical calculations for the tightenings (Psets).
Click Store to save the settings.
7.11 Running a Pset
To run (activate) the Pset, select the Pset in the Selection panel or via any configured Pset control source.
This must correspond with the selected source in C200 Pset, see information in section Controller
Configuration and parameter list Configuration.