To access the data input boxes, do one of the
following:
 Highlight it and then press ENTER.
 Press the digit on the numeric keypad that
corresponds to the option.
To enter data, do the following:
 If it is a text box, use the keypad and press
until the desired figure, letter or symbol
appears. Press ENTER to confirm and exit the
data field.
 If it is a selection list, do one of the following:
o Use the soft keys under the arrows to
highlight the desired parameter. Press
ENTER to confirm and exit the selection
list.
o Press the digit on the numeric keypad that
corresponds to the desired parameter to
confirm and exit the selection list.
Press Store to save the changes in the controller
and stay in the current display.
Press OK to confirm changes and return one level
up in the menu tree. More changes can be made
before storing.
Press Cancel to cancel any changes and leave the
dialog box.
To Next Page
Loading...
Need help?
General
