Atlas Copco Power Focus 3000 User Manual

Tool
9836 3123 01 143 (428)
11 Tool
The Tool section contains information for Tensor tools connected to Power Focus. The
information available through PF includes for example general tool information and service
status, as well as hardware- and software configuration.
This section includes screenshots from ToolsTalk PF. The screenshots show examples of
parameter settings and are NOT intended to be generally applicable. Check with your
local Atlas Copco representative how to set up your specific system environment.
See parameter list section Tool for a description of all available Tool options. See tool
specific information for more information about the options for each tool.
The tool parameters are visible depending on which tool is connected. For STB, most parameters are
invisible when the tool is offline.
11.1 Tool information
Expand the Tool branch in the PF Map.
Double-click on Information.

Atlas Copco Power Focus 3000 Specifications

General

Brand	Atlas Copco
Model	Power Focus 3000
Category	Control Systems
Language	English