Atlas Copco Power Focus 3000 User Manual

Parameter list
9836 3123 01 341 (428)
22 Parameter list
This section lists the Power Focus parameters.
22.1 Pset
22.1.1 Programming
Parameter
number
Parameter name
Description
Default
setup
P100
Control strategy
For a description of the options, see section Control strategies.
Tq con
Tq con/ang mon
Tq con/ang con (AND)
Tq con/ang con (OR)
Ang con/tq mon
DS con
DS con/tq mon
Reverse ang
Reverse tq
Click wrench
Rotate spindle forward
Rotate spindle reverse
Home position forward
Home position reverse
EP monitoring
Yield
Yield / Tq con (OR)
Pulsor fixed
Pulsor control
Snug gradient
Residual Tq7Time
Residual Tq/Angle
Breakaway peak
Loose and tightening
Pulsor angle shutoff
The Reverse angle, Rotate spindle forward/reverse, and Home
position forward/reverse strategies are not applicable for
Open end tools.
IF DS tool:
DS con
ELSE: Tq
con/ang
mon

Atlas Copco Power Focus 3000 Specifications

General

Brand	Atlas Copco
Model	Power Focus 3000
Category	Control Systems
Language	English