Atlas Copco Power Focus 3000 User Manual

Fieldbus
214 (428) 9836 3123 01
0 < Pset ID < max
number of Pset
Select Pset and set batch size
No Pset selected
Function (C200 Pset is set to Fieldbus selector)
0 < Batch size < 99
Batch size = 0, Batch size > 99
Pset ID = 0
Selector socket
lifted correctly
No Pset selected
No Pset selected
Selector socket
lifted incorrectly
Display event code E475 Fieldbus
PsetID mismatch selector lifted
socket
No Pset selected
Display event code E475 Fieldbus
PsetID mismatch selector lifted
socket
No Pset selected
0 < Pset ID < max
number of Pset
Selector socket
lifted correctly
Select Pset, set batch size and
unlock tool
Display event code E475 Fieldbus
PsetID mismatch selector lifted
socket
No Pset selected
Selector socket
lifted incorrectly
Display event code E475 Fieldbus
PsetID mismatch selector lifted
socket
No Pset selected
Display event code E475 Fieldbus
PsetID mismatch selector lifted
socket
No Pset selected
15.8 Fieldbus information
This section lists the fieldbus types.
15.8.1 ProfiBus-DP
ProfiBus-DP is a fieldbus normally used in industrial automation, to transfer fast data for motor controllers,
MMI, I/O units and other industrial equipment. ProfiBus has an international user organization called
ProfiBus International, PI, and other local and national organizations. General technical questions
regarding the fieldbus should be addressed to the local ProfiBus User Group in the first instance.
A contact address list is available on the ProfiBus internet site: http://www.ProfiBus.com.
For general help on ProfiBus, contact ProfiBus International on:
ProfiBus_international@compuserve.com.

Atlas Copco Power Focus 3000 Specifications

General

Brand	Atlas Copco
Model	Power Focus 3000
Category	Control Systems
Language	English