Atlas Copco Power Focus 3000 User Manual

Parameter list
9836 3123 01 357 (428)
22.3.2 Programming
Parameter
number
Parameter name
Description
Default
setup
J300
Job list
The Job list specifies the Psets and Multistages that can be included in the
Job. The total number of Psets/Multistages in one Job can not exceed 50.
This parameter contains:
PF channel: Power Focus channel ID that the selected Pset and Multistage
belongs to.
Pset/Ms (Event): identification number of Psets/Multistages included in
the Job. The Psets/Multistages specified in the Job must be predefined, and
they can be included in more than one Job. Same Pset/Multistage can be
used several times in a Job.
Pset name: name of the selected Psets/Multistages. (Pset name is not
visible in Job list on PF Graph).
Auto select: yes = auto select, no = manually select.
With auto select the Job functionality automatically chooses the next Pset.
With a manually selected Pset/Multistage the operator must manually
choose the next Pset.
This function is only available for forced order Jobs.
It is not possible to use the auto select functionality for free
order Jobs (see parameter J301 Job order type).
A Job has override privileges, in comparison to a single
Pset/Multistage, on a defined maximum allowed amount of
possible NOK (not OK) subsequent tightenings.
Batch size: A batch size should be specified for each Pset or Multistage in
a Job. The batch size specifies the number of tightenings to be performed
for each Pset or Multistage. Maximum batch size is 99. It is possible to
define free running Psets/Multistages by setting batch size to 0. In this
case, the bypass function must be used to be able to continue the selected
Job.
Max coherent Not OK tightenings (NOK’s): Max coherent Not OK
tightenings (NOK’s) are a defined maximum allowed amount of possible
NOK (not OK) subsequent tightenings for each Pset/Multistage in a Job.
If P153 Max coherent NOK’s or M208 Max coherent NOK’s is used for the
Psets or Multistages included in the Job, these settings are ignored by the
Job setting.
The tool will be locked (for both tightening and loosening) when number
of possible not OK tightenings is reached for each batch.
When the tool is locked due to possible not OK tightenings the only ways
to unlock the tool are:
Reset counter for performed not OK tightening via a digital input.
Select abort Job (in case the selected Job shall not lock the tool).
Select Job off.

Atlas Copco Power Focus 3000 Specifications

General

Brand	Atlas Copco
Model	Power Focus 3000
Category	Control Systems
Language	English