Controller
138 (428) 9836 3123 01
Make settings for Presentation, Result
view, Keyboard and Power save.
Note that there are more selections
available on the controller display.
See parameter list section Display.
Click Store to save settings.
Make settings for screen colors:
Color theme
Background color for OK result
Foreground (text) color for OK result
Background color for NOK result
Foreground (text) color for NOK
result
Click Store to save settings.
10.6 Memory
All data stored in PF, except parameters C300 IP address, C301 Subnet mask and C302 Default
router, will be erased when changing memory setup. Therefore, use the ToolsTalk PF function
“Store PF to file” to save the existing data configuration (including Psets, Multistages, and
Jobs). The data can later be retrieved via function “Read PF from file”.
When changing the memory setup PF must be rebooted for the changes to take effect. It is
necessary to “Read PF from file” twice and reboot PF one extra time.
It is recommended to reboot immediately.
Configurable memory is only available for RBU Gold and RBU Silver.
To Next Page
Loading...
Need help?
General
