Parameter list
374 (428) 9836 3123 01
22.5.5 Buzzer configuration
The tool parameters are visible depending on which tool is connected. For STB, most parameters are
invisible when the tool is offline.
Valid scope: 400 - 4000 Hz
Valid scope: 0.01 - 65.0 Seconds
Valid scope: 0.01 - 65.0 Seconds
Valid scope: 0 - 100 times
Valid scope: 0 - 100 %
This parameter is relative (in percent) to parameter T221 Volume, which could
be set to high, medium or low. T221 Volume is found in the sound setup
window.
22.5.6 Sound configuration
The tool parameters are visible depending on which tool is connected. For STB, most parameters are
invisible when the tool is offline.