Atlas Copco Power Focus 3000 - Application

Getting started with ToolsTalk PF
9836 3123 01 65 (428)
6.3.2 Application
The Application tab has three areas; Presentation, Automatic functionality, and Default directory.
The first area concerns the ToolsTalk PF presentation.
 If the Show hints checkbox is selected, then the limits for each parameter are displayed in the status bar
when the cursor is placed over a parameter box.
 If the Show parameter number checkbox is selected, then all parameter numbers are displayed in the
windows.
 If the Show VIN in result checkbox is selected, then the result parts selected in the Identifier function are
displayed in the Result monitor.