Atlas Copco Power Focus 3000 User Manual

Fieldbus
244 (428) 9836 3123 01
12 < length ≤ 24
2
8
length - 8
Word data range 5-16 bytes
24 < length ≤ 36
3
12
length - 12
Word data range 13-24 bytes
36 < length ≤ 48
4
16
length - 16
Word data range 21-32 bytes
48 < length ≤ 200
16
32
Data after 48 bytes not accessible from the bus
Data representation with CC-Link version 2
When using version 2, the module can optionally use an extended number of bus cycles to
exchange larger data size. Note that this feature requires a CC-Link v.2 capable master. The
relation between the occupied stations and the number of extension cycles are defined in the
following table. The PF supported combinations are marked with yellow color.
Occupied
stations
1 Extension Cycles
2 Extension Cycles
4 Extension Cycles
8 Extension Cycles
Points
Bytes
Data
length
bytes
Points
Bytes
Data
length
bytes
Points
Bytes
Data
length
bytes
Points
Bytes
Data
length
bytes
1
32 bits
4
12
32 bits
4
20
64 bits
8
40
128 bits
16
80
4 words
8
8 words
16
16
words
32
32 words
64
2
64 bits
8
24
96 bits
12
44
192 bits
24
88
384 bits
48
176
8 words
16
16
words
32
32
words
64
64 words
128
3
96 bits
12
36
160 bits
20
68
320 bits
40
136
640 bits
80
272
12
words
24
24
words
48
48
words
96
96 words
192
4
128 bits
16
48
224 bits
28
92
448 bits
56
184
896 bits
112
368
16
words
32
32
words
64
64
words
128
128
words
256
When running version 2, the data length defined in TTPF for F102 or F103 must match the
corresponding data sizes in the table above, otherwise, the module will indicate an error. In this
position data length is selected from drop-down list.

Atlas Copco Power Focus 3000 Specifications

General

Brand	Atlas Copco
Model	Power Focus 3000
Category	Control Systems
Language	English