Introduction to Power Focus
26 (428) 9836 3123 01
Socket Selector is a socket tray with LED’s that can be used to guide the user
through, for example, a Job sequence. When using more than one Pset it is
very convenient to use a selector. When a socket is lifted, the corresponding
Pset will be selected.
The Socket Selector is available with four or eight sockets, and
communicates on the I/O bus.
Operator Panel is an external device for PF. It is a general purpose lamp- and
switchbox, replacing the customer specials that are made today. The Operator Panel
communicates directly with Power Focus and the device configuration is made in
ToolsTalk PF.
Stacklight ESL-04 is a flexible light and switch device designed to interface with
controllers equipped with an I/O Bus.
Stacklight DSL-03 is a simple and customizable light and switch device, designed to
interface with controllers equipped with Internal I/O connectors instead of I/O-bus.
The stacklight comes with features such as buzzer, rotating light etc.
MiniDisplay is a compact remote interface. It runs the Operator Guidance
application program to give the operator visual support. It is equipped with a
touch-screen and is fully configurable. The MiniDisplay is connected through
Ethernet and does not support I/O-bus communication.
To Next Page
Loading...
Need help?
General
