Atlas Copco Power Focus 3000 User Manual

Event codes
406 (428) 9836 3123 01
Event
code
Event name
Description
Procedure
Acknowledge
PF ready
Tool ready
E433
No RBU present
No RBU detected at start-up or RBU
found missing at runtime.
Acknowledge the event.
Check that there is an RBU and that it
is connected properly.
x
x
x
E434
RBU Timeout
RBU did not respond to command from
Power Focus.
Acknowledge the event.
Check that the RBU is connected
properly.
Reboot PF.
If the event reappears, replace the
RBU
x
x
x
E436
RBU file system
warning
RBU file system warning because of
download interruption.
Reboot PF.
If the event reappears, replace the
RBU
E437
RBU file system
corrupt
RBU file system fault. An attempt will be
made to repair it by means of erasing the
RBU.
Acknowledge the event.
Reboot PF.
Replace the RBU.
x
x
x
E438
RBU file
mismatch
A file with incorrect name or size was
returned to a read request.
Acknowledge the event.
Reboot PF.
Replace the RBU.
x
x
x
E440
RBU no files
RBU file system fault.
Acknowledge the event.
Reboot PF.
Replace the RBU.
x
x
x
E441
RBU access too
busy
RBU has answered to the poll but Power
Focus is too busy to receive the reply.
Acknowledge the event.
Acknowledge the event.
Upgrade PF software.
x
x
x
E442
RBU no such file
RBU file system fault.
Acknowledge the event.
Reboot PF.
Replace the RBU.
x
x
x
E444
RBU packet
rejected
RBU responds with an answer not
matching the last request. This is probably
due to duplicates sent when the Power
Focus does not acknowledge packages.
Acknowledge the event.
Reboot PF.
Replace the RBU.
x
x
x
E445
RBU corrupt
RBU software fault.
Acknowledge the event.
Reboot PF.
Replace the RBU.
x
x
x
E446
RBU read error
RBU read operation failed.
Acknowledge the event.
Try read again
Reboot PF
Replace the RBU
x
x
x

Atlas Copco Power Focus 3000 Specifications

General

Brand	Atlas Copco
Model	Power Focus 3000
Category	Control Systems
Language	English