5. Installation
Or,
click on Select (5b) to display a list of possible article numbers (6). Select a article number (7) and click
OK (8).
The software will check if the entered article number is a valid number (9).
4. Fill out the serial number of the lamp (10).
5. Click Reset (11).
Image 5-14
Reset lamp info, new lamp
For a used lamp, how to set back the original values
1. While the Lamp information window is displayed, click on Reset (1). (image 5-15)
A Reset lamp parameters window opens (2).
132
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
To Next Page
Loading...
Need help?
General
