5. Installation
Image 5-31
ICP clock via touch panel
To set the clock to UTC/GMT time using NTP
1. Tip on Internal clock (1). (image 5-32)
2. ICP tab is opened by default.
3. Tip on the radio button before UTC/GMT using NTP (4)
4. Fill out the server IP address (5).
Note: An address contains 4 octets with a maximum value of 255.
5. Tip Apply All (6).
Tip on OK to set the new time as current time and to close the system clock window at the same time.
152
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
To Next Page
Loading...
