Campbell CR1000 User Manual

Section 7. Installation
beginning and end of alphanumeric strings inside the parentheses of the
HTTPOut() instruction. For additional information, see the CRBasic Editor Help.
In this example program, the default home page is replaced by using
WebPageBegin to create a file called default.html. The new default home page
created by the program appears as shown in the figure Home Page Created using
WebPageBegin() Instruction
(p. 292).
The Campbell Scientific logo in the web page comes from a file called
SHIELDWEB2.JPG that must be transferred from the PC to the CR1000 CPU:
drive using File Control in the datalogger support software.
A second web page, shown in figure Customized Numeric-Monitor Web Page
(p.
293)
called "monitor.html" was created by the example program that contains links
to the CR1000 data tables.
Figure 74. Home Page Created Using WebPageBegin() Instruction
292

Campbell CR1000 Specifications

General

Power Requirements	9.6 to 16 VDC
Data Logger Operating System	CRBasic
Memory	4 MB
Analog Inputs	16 single-ended or 8 differential
Analog Input Resolution	13 bits
Analog Input Range	+/-2.5V
Digital I/O	8
Pulse Counters	2
Communication Ports	RS-232
Operating Temperature	-25°C to +50°C
Pulse Channels	4