Campbell CR1000 User Manual

Appendix B. Status, Settings, and Data Table Information (Status/Settings/DTI)
Table 147. Status/Settings/DTI: Settings (comport) on CR1000KD Keyboard Display
Baudrate() (p. 611)
Beacon()
(p. 612)
Neighbors()
(p. 622)
Verify()
(p. 632)
Table 148. Status/Settings/DTI: Settings (TCP/IP) on CR1000KD Keyboard Display
IPInfo (p. 618)
EthernetEnable
(p. 616)
CSIO1netEnable
pppIPAddr
(p. 625)
pppIPMask
(p. 625)
pppUsername
(p. 625)
pppPassword
(p. 625)
pppDial
(p. 624)
CSIO2netEnable
EthernetPower
(p. 616)
IPAddressEth
(p. 618)
IPMaskEth
(p. 618)
pppDialResponse
(p. 625)
IPTraceComport
(p. 619)
IPTraceCode
(p. 619)
DNS()
(p. 615)
PakBusTCPClients
(p. 623)
IPGateway (p. 618)
IPAddressCSIO()
(p. 618)
UDPBroadcastFilter
(p. 631)
HTTPEnabled
(p. 617)
FTPEnabled
(p. 616)
TelnetEnabled
(p. 630)
PingEnabled
(p. 624)
IPMaskCSIO() (p. 618)
IPGatewayCSIO()
(p. 618)
PakBusPort
(p. 623)
FTPPort
(p. 617)
HTTPPort
(p. 617)
PakBusTCPEnabled
(p. 624)
FTPUserName
(p. 617)
FTPPassword
(p. 616)
pppInterface
(p. 625)
Table 149. Status/Settings/DTI: Settings Only in Settings Editor
TLS Certificate (p. 630) TLS Private Key (p. 630)
Table 150. Status/Settings/DTI: Data Table Information Table (DTI) Keywords
DataFillDays() (p. 615)
DataRecordSize() (p. 615)
DataTableName() (p. 615)
SecsPerRecord() (p. 627)
SkippedRecord() (p. 628)
607

Campbell CR1000 Specifications

General

Power Requirements	9.6 to 16 VDC
Data Logger Operating System	CRBasic
Memory	4 MB
Analog Inputs	16 single-ended or 8 differential
Analog Input Resolution	13 bits
Analog Input Range	+/-2.5V
Digital I/O	8
Pulse Counters	2
Communication Ports	RS-232
Operating Temperature	-25°C to +50°C
Pulse Channels	4