Campbell CR1000 User Manual

Section 8. Operation
"2012-05-04 03:00:00",10,0,-0.8754569,-0.9275675,-0.8910902,-
0.8546127,72.53336,0
"2012-05-04 04:00:00",11,0,-0.8949984,-0.9575311,-0.9106316,-
0.8793653,72.47779,0
"2012-05-04 05:00:00",12,0,-0.9236593,-0.9705587,-0.908026,-
0.8715487,72.4006,0
"2012-05-04 06:00:00",13,0,-0.9184482,-0.9601365,-0.902815,-
0.8819707,72.23279,0
"2012-05-05 11:00:00",0,5,-0.9106316,-0.941898,-0.8897874,-
0.8637322,4.740396,0
"2012-05-05 12:00:00",1,5,-0.9067233,-0.9640449,-0.9015122,-
0.8702459,71.16611,0
"2012-05-05 13:00:00",2,5,-0.8897874,-0.9366869,-0.8793653,-
0.8428879,70.93591,0
"2012-05-05 14:00:00",3,5,-0.9041178,-0.9510173,-0.8884846,-
0.8676404,70.78558,0
"2012-05-05 15:00:00",4,5,-0.9002095,-0.9627421,-0.9002095,-
0.8689431,70.66192,0
"2012-05-05 16:00:00",5,5,-0.9054205,-0.95232,-0.9054205,-
0.8741542,70.53237,0
"2012-05-05 17:00:00",6,5,-0.9158427,-0.9731642,-0.9002095,-
0.8637322,70.4076,0
"2012-05-05 18:00:00",7,5,-0.9223565,-0.969256,-0.9015122,-
0.8910902,70.33669,0
"2012-05-05 19:00:00",8,5,-0.8923929,-0.9445034,-0.8923929,-
0.8507045,70.25033,0
"2012-05-05 20:00:00",9,5,-0.9119344,-0.9640449,-0.9171454,-
0.8754569,70.1702,0
"2012-05-05 21:00:00",10,5,-0.930173,-0.9822836,-0.9197509,-
0.8832736,70.1116,0
"2012-05-05 22:00:00",11,5,-0.9132372,-0.9653476,-0.908026,-
0.8611265,70.0032,0
"2012-05-05 23:00:00",12,5,-0.9353842,-0.9822836,-0.930173,-
0.8936957,69.83805,0
TOB1 Response
When tob1 is entered in the DataQuery format parameter, the response will be
formated as Campbell Scientific TOB1. Following is an example response.
Example:
"TOB1","11467","CR1000","11467","CR1000.Std.20","CPU
:file format.CR1","61449","Test"
"SECONDS","NANOSECONDS","RECORD","battfivoltfiMin","
PTemp"
"SECONDS","NANOSECONDS","RN","",""
"","","","Min","Smp"
"ULONG","ULONG","ULONG","FP2","FP2"
376
}Ÿp' E1HŒŸp' E1H›Ÿp' E1HªŸp' E1H¹Ÿp'
E1H
8.6.3.14.6 Control — SetValueEx Command
SetValueEx allows a web client to set a value in a host CR1000 CRBasic
variable.
http://ip_address/?command=SetValueEx&uri=dl:table.variable&valu
e=x.xx
436

Campbell CR1000 Specifications

General

Power Requirements	9.6 to 16 VDC
Data Logger Operating System	CRBasic
Memory	4 MB
Analog Inputs	16 single-ended or 8 differential
Analog Input Resolution	13 bits
Analog Input Range	+/-2.5V
Digital I/O	8
Pulse Counters	2
Communication Ports	RS-232
Operating Temperature	-25°C to +50°C
Pulse Channels	4