Campbell CR1000 User Manual

Section 8. Operation
header, time stamps, and record numbers are usually required. Fully compatible
formats are indicated with an asterisk. A more detailed discussion of data-file
formats is available in the Campbell Scientific publication LoggerNet Instruction
Manual, which is available at www.campbellsci.com.
Table 88. TableFile() Instruction Data-File Formats
TableFile()
Format
Option
Base
File
Format
Elements Included
Header
Information
Time
Stamp
Record
Number
0
1
TOB1
  
1
TOB1  
2
TOB1
 
3
TOB1

4
TOB1  
5
TOB1

6
TOB1

7
TOB1
8
1
TOA5
  
9
TOA5
 
10
TOA5
 
11
TOA5 
12
TOA5
 
13
TOA5

14
TOA5 
15
TOA5
16
1
CSIXML   
17
CSIXML
 
18
CSIXML  
19
CSIXML

32
1
CSIJSON   
33
CSIJSON
 
34
CSIJSON
 
35
CSIJSON 
64
2
TOB3
1
Formats compatible with datalogger support software (p. 95) data-viewing and graphing utilities
2
See Writing High-Frequency Data to Memory Cards (p. 205) for more information on using
option 64.
378

Campbell CR1000 Specifications

General

Power Requirements	9.6 to 16 VDC
Data Logger Operating System	CRBasic
Memory	4 MB
Analog Inputs	16 single-ended or 8 differential
Analog Input Resolution	13 bits
Analog Input Range	+/-2.5V
Digital I/O	8
Pulse Counters	2
Communication Ports	RS-232
Operating Temperature	-25°C to +50°C
Pulse Channels	4