Campbell CR1000 User Manual

Appendix G. Supporting Products Lists
PS84
84 Ahr, rechargeable battery, Sunsaver regulator, and
enclosure (requires primary source).
G.9.2 Batteries List
Table 226. Batteries
Model Description
BPALK D-cell, 12 Vdc alkaline battery pack
BP7
7 Ahr, sealed-rechargeable battery (requires regulator &
primary source). Includes mounting bracket for Campbell
Scientific enclosures.
BP12
12 Ahr, sealed-rechargeable battery (requires regulator &
primary source). Includes mounting bracket for Campbell
Scientific enclosures.
BP24
24 Ahr, sealed-rechargeable battery (requires regulator &
primary source). Includes mounting bracket for Campbell
Scientific enclosures.
BP84
84 Ahr, sealed-rechargeable battery (requires regulator &
primary source). Includes mounting bracket for Campbell
Scientific enclosures.
G.9.3 Regulators List
Table 227. Regulators
Model Description
CH100 12 Vdc charging regulator (requires primary source)
CH200 12 Vdc charging regulator (requires primary source)
G.9.4 Primary Power Sources List
Table 228. Primary Power Sources
Model Description
29796 24 Vdc 1.67 A output, 100 to 240 Vac 1 A input, 5 ft cable
SP5-L 5 watt solar panel (requires regulator)
SP10 10 watt solar panel (requires regulator)
SP10R 10 watt solar panel (includes regulator)
SP20 20 watt solar panel (requires regulator)
SP20R 20 watt solar panel (includes regulator)
SP50-L 50 watt solar panel (requires regulator)
658

Campbell CR1000 Specifications

General

Power Requirements	9.6 to 16 VDC
Data Logger Operating System	CRBasic
Memory	4 MB
Analog Inputs	16 single-ended or 8 differential
Analog Input Resolution	13 bits
Analog Input Range	+/-2.5V
Digital I/O	8
Pulse Counters	2
Communication Ports	RS-232
Operating Temperature	-25°C to +50°C
Pulse Channels	4