Campbell CR1000 User Manual

Appendix B. Status, Settings, and Data Table Information (Status/Settings/DTI)
Verify()
Settings Editor: Verify Interval
AKA: Communication Ports Verification
Intervals
Keyboard: Settings (comports)
CRBasic: variable = settings.keyword;
SetSettings()
Array of integers indicating the interval that is
reported as the link verification interval in the
PakBus hello transaction messages. Indirectly
governs the rate at which the CR1000 attempts to
start a hello transaction with a neighbor if no other
communication has taken place within the interval.
Array
Element
Number
Port
Keyword
(1)
(2)
(3)
(4)
(5)
(6)
ComRS232
ComME
ComSDC7
ComSDC8
ComSDC10
ComSDC11
(7)
(8)
Com1
Com2
(9)
(10)
Com3
Com4
See table Baudrate(), Beacon(), and Verify() Details.
read/write
LONG
seconds
0
0 to
2147483648
Table 186. Status/Settings/DTI: W
Keyword
Alias,
Access,
Description
Read/Write,
DataType,
Units
Default
Value
Normal
Range
WatchdogErrors
Keyboard: Status Table ≈ line 14
Station Status: Watchdog Errors
CRBasic: variable = status.keyword
Number of watchdog errors that have occurred while
running this program. Resets automatically when a
new program is compiled.
read only
LONG
counts
0
≥ 0
0 = reset
632

Campbell CR1000 Specifications

General

Power Requirements	9.6 to 16 VDC
Data Logger Operating System	CRBasic
Memory	4 MB
Analog Inputs	16 single-ended or 8 differential
Analog Input Resolution	13 bits
Analog Input Range	+/-2.5V
Digital I/O	8
Pulse Counters	2
Communication Ports	RS-232
Operating Temperature	-25°C to +50°C
Pulse Channels	4