Appendix G. Supporting Products Lists
Most electronic sensors, regardless of manufacturer, will interface with the
CR1000. Some sensors require external signal conditioning. The performance of
some sensors is enhanced with specialized input modules.
G.5.1 Wired-Sensor Types List
The following wired-sensor types are available from Campbell Scientific for
integration into CR1000 systems. Contact a Campbell Scientific application
engineer for specific model numbers and integration guidance.
Table 208. Wired Sensor Types
Air temperature
Pressure
Roadbed water content
Relative humidity Snow depth
Barometric pressure Snow water equivalent
Conductivity Soil heat flux
Digital camera Soil temperature
Dissolved oxygen Soil volumetric water content
Distance Soil volumetric water content profile
Soil water potential
Electrical current Solar radiation
Electric field (Lightning) Strain
Evaporation Surface temperature
Freezing rain and ice Turbidity
Fuel moisture and temperature Visibility
Geographic position (GPS) Water level and stage
Heat, vapor, and CO
2
flux
Water flow
Leaf wetness
Net radiation
Water quality
ORP / pH Water sampler
Precipitation Water temperature
Present weather Wind speed / wind direction
G.5.2 Wireless-Network Sensors List
Wireless sensors use the Campbell wireless sensor (CWS) spread-spectrum radio
technology. The following wireless sensor devices are available.
Table 209. Wireless Sensor Modules
Model Description
CWB100 Series Radio-base module for datalogger.
CWS220 Series Infrared radiometer
CWS655 Series Near-surface volumetric soil water-content sensor
CWS900 Series Configurable, remote sensor-input module
650
To Next Page
Loading...
Need help?
General
