Campbell CR1000 User Manual

Appendix A. CRBasic Programming Instructions
INSATSetup
Configures the OMNISAT-I transmitter for sending data over the INSAT-1
satellite.
Syntax
INSATSetup(ResultCode, PlatformID, RFPower)
INSATStatus
Queries the transmitter for status information.
Syntax
INSATStatus(ResultCode)
A.22 User-Defined Functions
Function / Return / Exit Function / EndFunction
Creates a user-defined CRBasic instruction
Syntax
Function [optional parameters] As [optional data type]
Return [optional expression]
ExitFunction [optional]
EndFunction
Optional
Defines a list of optional parameters that can be passed into a subroutine or
function.
Syntax
Function (FunctionName) Param1, Param2, Optional Param3,
Param4
602

Campbell CR1000 Specifications

General

Power Requirements	9.6 to 16 VDC
Data Logger Operating System	CRBasic
Memory	4 MB
Analog Inputs	16 single-ended or 8 differential
Analog Input Resolution	13 bits
Analog Input Range	+/-2.5V
Digital I/O	8
Pulse Counters	2
Communication Ports	RS-232
Operating Temperature	-25°C to +50°C
Pulse Channels	4