Campbell CR1000 User Manual

Appendix G. Supporting Products Lists
SP90-L 90 watt solar panel (requires regulator)
DCDC18R
12 Vdc to 18 Vdc boost regulator (allows automotive
supply voltages to recharge sealed, rechargeable batteries)
G.9.5 24 Vdc Power Supply Kits List
Table 229. 24 Vdc Power Supply Kits
Model Description
28370 24 Vdc, 3.8 A NEC Class-2 (battery not included)
28371 24 Vdc, 10 A (battery not included)
28372 24 Vdc, 20 A (battery not included)
G.10 Enclosures — Products
Table 230. Enclosures — Products
Model Description
ENC10/12
10 inch x 12 inch weather-tight enclosure
(will not house CR3000)
ENC12/14
12 inch x 14 inch weather-tight enclosure. Pre-
wired version available.
ENC14/16
14 inch x 16 inch weather-tight enclosure. Pre-
wired version available.
ENC16/18
16 inch x 18 inch weather-tight enclosure. Pre-
wired version available.
ENC24/30 24 inch x 30 inch weather-tight enclosure
ENC24/30S
Stainless steel 24 inch x 30 inch weather-tight
enclosure
Table 231. Prewired Enclosures
Model Description
PWENC12/14 Pre-wired 12 inch x 14 inch weather-tight enclosure.
PWENC14/16 Pre-wired 14 inch x 16 inch weather-tight enclosure.
PWENC16/18 Pre-wired 16 inch x 18 inch weather-tight enclosure.
G.11 Tripods, Towers, and Mounts Lists
Table 232. Tripods, Towers, and Mounts
Model Description
CM106B 3 meter (10 ft) tripod tower, galvanized steel
CM110 3 meter (10 ft) tripod tower, stainless steel
CM115 4.5 meter (15 ft) tripod tower, stainless steel
CM120 6 meter (20 ft) tripod tower, stainless steel
659

Campbell CR1000 Specifications

General

Power Requirements	9.6 to 16 VDC
Data Logger Operating System	CRBasic
Memory	4 MB
Analog Inputs	16 single-ended or 8 differential
Analog Input Resolution	13 bits
Analog Input Range	+/-2.5V
Digital I/O	8
Pulse Counters	2
Communication Ports	RS-232
Operating Temperature	-25°C to +50°C
Pulse Channels	4