Pack the printer
1. Press the Power button and turn off the printer.
Important
• Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off
and transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink
tanks, and follow this procedure again.
2. Disconnect the power cord, interface cable, and Media Take-up Unit Power Inlet.
3. Open the Top Cover and lift the Ejection Guide.
4. Remove the four ejection supports and lower the Ejection Guide.
Maintenance
>
Other Maintenance
>
Preparing to Transfer the Printer iPF8300
11
1036
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
