Canon ipf8300 - Page 815

1. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2. Press the OK button. The Paper Menu is displayed.
3. Press ▲ or ▼ to select Paper Details, and then press the OK button.
4. Press ▲ or ▼ to select the type of paper, and then press the OK button.
5. Press ▲ or ▼ to select Cutting Mode, and then press the OK button.
6. Press ▲ or ▼ to select Manual, and then press the OK button.
7. Print the job.
The printer stops advancing the paper after printing.
8. Press the Feed button.
Roll paper is fed to the specified cut position and then automatically stopped.
Handling Paper
> Handling rolls >
iPF8300 Specifying the Cutting Method for Rolls
7
797
Downloaded from ManualsPrinter.com Manuals