Bodywork
Interior fittings
70.
Bravo-Brava
5 P.
bolt fixing the rear seat belt.
2.
Undo the bolts shown and remove the rear
pillar cover.
3. Undo the bolts shown and remove the rear
access trims for the tailgate hinge fixings.
4.
Heat the roof from the outside using an in-
fra red lamp to assist with the separation
of the bodyshell lining:
Avoid temperatures exceeding 90°C
in order not to damage the paint-
W
work.
0
5. Cut the lining in a longitudinal direction to
allow the subsequent removal of the roof
panel from the vehicle, then extract it
through the tailgate housing. (Do not pull
the roof panel downwards so as not to
distort it).
Print no. 506.670
To Next Page
Loading...
