Bravo-Brava
Bodywork
Replacing structural body panels
70.
Welding the outer panel replacement part
1.
Reposition the replacement part on the template and on the bodyshell, align it correctly, then weld it
as illustrated in the diagram.
|MJ Carry out the three welds illustrated
so
that they
are
not positioned along the same line and
±£J are therefore offset to one another (see page 59 in this manual).
P4A151M01
Finishing operations
1.
Remove and smooth out the weld residues.
P4A161 M02
UUUUUUUU Continuous MIG welding
Spot welding
Proceed with fitting the front cross member (see: "Replacing front cross member")
Protections
Refer to what has been described previously for the other components.
Copyright by Fiat Auto
151
To Next Page
Loading...
