3. Mode
35800
2/2
35800
Maintenance
*1. If the current communication speed does not apply to any of the following, nothing is shown.
• 100 Mbps HALF
• 100 Mbps FULL
• 100 Mbps FULL (Auto negotiation failed)
• 100 Mbps HALF (AutoNego)
• 100 Mbps FULL (AutoNego)
• 10 Mbps HALF (AutoNego)
• 10 Mbps FULL (AutoNego)
!
!!
! Functions
!
!!
! Program Timer Setting
The mode can be moved to the program timer setting.
At the installation, set the date/time and program timer.
Type Displays the display module type.
QSS-37
• TYPE1
LP7500/LP7600/LP7700/LP7900
• TYPE2
Date of shipment Displays the Date of shipment of the output device obtained from the output device.
Communication Speed Setting Communication speed can be selected from the following.
Usually, select AUTO.
1. AUTO
2. Fixed to 100 Mbps HALF
3. Fixed to 100 Mbps FULL
Current communication speed
*1
Displays the current communication speed.
Circulation Pump Stand-by Function (only
for SM)
Circulation Pump Stand-by function can be set in this mode.
SM Replenishment Setting (only for SM) Forced replenishment ON/OFF can be set.
Item Explanation
Distributed by: minilablaser.com
To Next Page
Loading...