Error and attention message regulation
1/1
4. Troubleshooting
4001
4001
Error and a ttention message regulatio n
Classification of errors and attention messages
!
!!
! Attention message
Messages shown to provide information in normal processing are attention messages.
• If replacing consumable parts is necessary
• If the judgment of operator is necessary
• If a simple operation mistake has been made
!
!!
! Error
Messages shown in abnormal conditions are error messages.
• If there is something wrong with the system
• If a serious operation mistake has been made, performing the operation not allowed to be performed
!
!!
! Error/Attention message number
Error/Attention message number consists of main and suffix numbers. For 01234-00001, 01234 is the main number and 00001 is the
suffix number.
Main number
It identifies the content of Error/Attention message.
Operator takes a corrective action judging with the content and the countermeasure represented by the main number.
Suffix number
It identifies error occurring place and condition.
Service personnel figures out the error occurring condition judging with the content of the suffix number and performs the diagnosis.
IMPORTANT
• The digit number of suffix number for the Error/Attention message varies depending on the model. However, the suffix
number in five digits are described in the Service Manual.
• Example: Service Manual (suffix number)
• No.05900 Replenisher cartridge open motor operation error.
NOTE
• For the content of suffix number, see Suffix number.
☞4002
Suffix
number
Condition
00001 When the replenisher cartridge setting part is moved to the lower position for opening the replenisher cartridge, the
Replenisher Cartridge Position Sensor (Upper) does not turn to LIGHT even after a specified time has passed.
Model Display
LP7500/LP7600/LP7700/LP7900 No.05900-1 Replenisher cartridge open motor operation error.
QSS-37 No.05900-00001 Replenisher cartridge open motor operation error.
Distributed by: minilablaser.com
To Next Page
Loading...