2/2
6. Electrical parts
63275
63275
Positions of PCBs and electrical parts (dryer section, conveyor and order classification section)
*1. X10 is a relay that is installed on the processor relay PCB.
When the X10 on the processor relay PCB turns on, power is supplied to all control PCBs and they start up.
The printer I/F main PCB finishes
the startup operation.
ON The solution temperature
adjustment is complete.
An error that cannot be
resolved occurs.
Condition Condition of the printer
I/F Main PCB
Condition of the
processor
Condition
of the
X10
*1
Processor
condition
light
Manual
Sorter Switch
Distributed by: minilablaser.com
To Next Page
Loading...