Fujitsu PRIMERGY RX2520 M1 - Removing a 2.5-Inch Dummy Module

128 Upgrade and Maintenance Manual RX2520 M1
Hard disk drives / solid state drives
7.2.2.2 Removing a 2.5-inch dummy module
Figure 35: Removing a 2.5-inch dummy module
Ê Press both tabs together (1) and pull the dummy module out of its bay (2).
V CAUTION!
Save the dummy module for future use.
Always replace dummy modules into unused HDD / SSD bays to
comply with applicable EMC regulations and satisfy cooling
requirements.