Fujitsu PRIMERGY RX2520 M1 - Removing a Pass-Through;Expander Board

152 Upgrade and Maintenance Manual RX2520 M1
Hard disk drives / solid state drives
7.4.3.2 Removing a pass-through/expander board
Figure 58: Disconnecting the SAS cables
Ê Disconnect the SAS cables from the pass-through/expander board.
Ê If you want to remove the 3.5-inch HDD backplane, remove the OOB cable
(1)
Figure 59: Removing the pass-through/expander board
Ê Remove the screw (1).