Fujitsu PRIMERGY RX2520 M1 - Replacing the SAS RAID Controller; Preliminary Steps

196 Upgrade and Maintenance Manual RX2520 M1
Expansion cards and backup units
9.4.3 Replacing the SAS RAID controller
9.4.3.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 67
Ê "Disabling SVOM boot watchdog functionality" on page 68
Ê "Shutting down the server" on page 51
Ê "Disconnecting power cords" on page 52
Ê "Getting access to the component" on page 53
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver